Integrated Filling and Sealing Packaging Machine
Treat the capsule, coffee and lid as one sample set: prove dosing, dust control, a clean rim and sealing before fixing station count and automation.
Actual equipment photos from the factory. Confirm the final configuration with the containers, product, sample trials and agreed equipment scope.
Selection points
These details decide machine structure, changeover method and quotation accuracy.
The machine loads and locates capsules, doses coffee, feeds lids, heat-seals and discharges. Define capsule rim, powder flow and oil content, dose tolerance, pre-cut or rollstock lid, clean-seal criteria, cleaning, coding, inspection and any validated gas-flush requirement through continuous trials.
Coffee capsule filling and sealing machine for capsule loading, coffee dosing, pre-cut or rollstock lid feeding and heat sealing. Select by rim, powder, dose, lid, clean seal, cleaning and line trials.
Send capsule and lid samples or drawings, coffee samples, dose and tolerance, rim dimensions, pre-cut or rollstock format, peel/leak criteria, cleaning, coding, inspection, target cycle and gas requirement.
Provide details of the existing equipment or line, installation position, target cycle and site conditions. Compatibility, change parts and integration requirements can then be confirmed; associated equipment and functions must be listed separately.
Selection points
Photos, key dimensions, and packaging material details are enough to start; if details are incomplete, we will review the direction first.
Selection points
YJ-GZFM-ZD340
Actual output depends on cup format, dosing, station count, sealing dwell and automation. Confirm it through continuous trials with the real cup, lid and coffee powder, then select an integrated or linked line from the balanced cycle.
Coffee capsules; aluminum capsule cups; PP capsules; preformed capsule cups; small cup containers
Ground coffee; coffee granules; tea powder; powdered beverage mixes; capsule filling materials
Aluminum foil lids; pre-cut lids; roll film; composite heat-seal film; capsule cups
Quantitative capsule filling; lid placement; heat sealing
Send product, container, material, dimensions and target output.
Confirm configuration by process, changeover, cycle time and line needs.
Test sealing, filling, labeling or inspection results when needed.
Quote after confirming power, layout, lead time and spare parts.
Configuration selection
Pre-cut lids need individual feeding and registration; rollstock needs unwinding, print registration and cutting. Gas flushing is selected from a validated process objective, not from the food name alone.
Confirm sample compatibility, effect and basic parameters first.
Focus on station count, operating rhythm and changeover method.
Evaluate feeding, discharge, coding, inspection and floor space separately.
Integrated Filling and Sealing Packaging Machine
Selection points
Send capsule and lid samples or drawings, coffee samples, dose and tolerance, rim dimensions, pre-cut or rollstock format, peel/leak criteria, cleaning, coding, inspection, target cycle and gas requirement.
The machine loads and locates capsules, doses coffee, feeds lids, heat-seals and discharges. Define capsule rim, powder flow and oil content, dose tolerance, pre-cut or rollstock lid, clean-seal criteria, cleaning, coding, inspection and any validated gas-flush requirement through continuous trials.
Provide details of the existing equipment or line, installation position, target cycle and site conditions. Compatibility, change parts and integration requirements can then be confirmed; associated equipment and functions must be listed separately.
It is recommended to review sample test results, key dimensions, consumable specifications, power supply, air supply, cleaning and maintenance methods, and spare parts list to avoid modifying molds or adjusting stations on site.
Send Sample Information
Send capsule and lid samples or drawings, coffee samples, dose and tolerance, rim dimensions, pre-cut or rollstock format, peel/leak criteria, cleaning, coding, inspection, target cycle and gas requirement.