Preformed-box packaging · Start with product and package requirements

Rotary Filling and Sealing Machine for Facial Mask Boxes · Rotary box filling and sealing, four-box configuration — clip B

Shows another segment of the four-box configuration. Confirm the actual operating cycle with representative samples.

Shows another segment of the four-box configuration. Confirm the actual operating cycle with representative samples.Rotary Filling and Sealing Machine for Facial Mask Boxes

Preformed-box packaging · Start with product and package requirements

How do the box, product and lidding film affect the process?

On the shown setup, an operator places two preformed empty boxes per cycle. If you need automatic box loading, assess the feeder against your box format and target cycle.
Dual-channel metered filling; confirm the pump type and fill volume with the actual product.
Automatic placement of pre-cut lidding film followed by heat sealing at two box positions.
The project material lists six rotary-table positions, with mechanical discharge at position five and position six reserved.

Box positioning → filling → pre-cut film heat sealing → discharge2 or 4 boxes per cycle: different toolingFit must be verified with representative samples

Start with the package conditions that affect locating, filling and sealing. Factory footage helps show visible machine structures and motions; it does not mean every facial-mask box project uses the same configuration.

Share box and product details Rotary Filling and Sealing Machine for Facial Mask Boxes

Review these five steps, from box locating to discharge

How do the box, product and lidding film affect the process?

You do not need to provide everything at once. A box sample or clear photos are a useful starting point; product, film and finished-pack details can follow.

Confirm the box and openingReview box dimensions, opening shape, loading orientation and outer-lid design.

Confirm the product and fill volumeDescribe the product condition and target fill volume so the filling step can be assessed.

Check the pre-cut lidding filmCompare the film structure, size and sealing surface with the box opening.

Plan filling and box sealingUse representative box, product and film samples to discuss stations and trial conditions.

Confirm discharge and downstream handlingDecide whether lids, inspection, conveying or secondary packing are needed for the finished pack.

Share box and product details

How do the box, product and lidding film affect the process?

Online Inquiry Form