Skip to main content
Global Sealing SystemsGuangzhou Yijia Packaging Technology Co., Ltd.
+86 156 0300 0900

Turntable vacuum tray sealing

Rotary Turntable Vacuum Tray Sealing Machine · Rotary Vacuum Tray Sealer · Four-Cavity Plastic Tray Factory Run

The factory video shows a four-cavity plastic tray on a rotary table, the sealing head pressing down, and a removed sealed sample. No clearly identifiable vacuum or gas-flushing cycle is shown, so the footage does not establish vacuum level, leak rate, or shelf-life performance. Confirm the tray, tooling, lidding film, and target vacuum with representative samples.

The factory video shows a four-cavity plastic tray on a rotary table, the sealing head pressing down, and a removed sealed sample. No clearly identifiable vacuum or gas-flushing cycle is shown, so the footage does not establish vacuum level, leak rate, or shelf-life performance. Confirm the tray, tooling, lidding film, and target vacuum with representative samples.Rotary Turntable Vacuum Tray Sealing Machine

Related solutions

Review the related packaging, sample and equipment-combination guidance.

Related solutionsFrom Prototype Sealing to Mass Production for Non-Standard Containers: Fixtures, Workstations, and Inspection Upgrades

Choose the rotary vacuum tray machine only when vacuum packaging is required and the chamber, evacuation and tray resistance have been tested. Ordinary continuous heat sealing is a separate route; a rotary table or conveyor does not automatically provide vacuum or MAP.

Related solutionsRotary Multi-Station Cup and Tray Line: Filling and Sealing, Vacuum Tray, and Pre-Cut Film Pick-and-Place

When the vacuum target is clear, use a rotary vacuum tray sealing machine. The sheet film route is handled by automatic pick-and-place equipment.

Steps from sample confirmation to delivery

Trays, film and vacuum/gas process must be confirmed as a set

Start with container photos, the intended lidding material and approximate output. You can enquire before drawings or full material specifications are ready; we will review the process and identify the samples needed.

Check tray and filmConfirm rim, depth, film heat seal layer, barrier and finished product appearance.
Test vacuum/gas processVerify product pressure resistance, atmosphere target, film and sealing window.
Integrate turntable stationsMatch feeding, positioning, vacuum, sealing, film cutting and discharge actions.
Continuous cycle acceptanceAccept according to agreed tray, product, atmosphere, speed and changeover standards.

Send samples and requirements

Inquiry

Online Inquiry Form

Please specify container type, sealing material, speed target, sample status, and target market.

* Enter at least an email address or phone / WhatsApp number so we can reply.

Complete the security check before submitting your inquiry.
Discuss Selection & Get a QuoteWhatsApp

We only load non-essential third-party content and analytics services after obtaining your consent, to protect privacy and optimize browsing experience.